MC74AC125DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC125 |
| Pin Count | 14 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 11.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 11.5 ns |
| Family | AC |
| Logic Function | Buffer, Inverting |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 1 |
| Control Type | ENABLE LOW |
| Number of Output Lines | 3 |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74AC125DTR2G Overview
Logical driver uses a neat 14-TSSOP (0.173, 4.40mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 24mA 24mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74AC series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a AC family part that is attached to this electronic component. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74AC125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 8μA. It is generally sold in TAPE AND REEL package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. To supply the device, a minimum voltage of 2V is a must. 4 channels for high quality communication. Wireless transceiver is able to output 3 lines.
MC74AC125DTR2G Features
Bus Driver/Transceivers
MC74AC125DTR2G Applications
There are a lot of ON Semiconductor MC74AC125DTR2G Buffers & Transceivers applications.
- Point-to-point networking
- Radio transmission
- interconnection between computers
- Gigabit Ethernet
- Wireless smart house
- Carrier phase observations
- Tuner
- Wireless teaching
- Desktop radio
- Data center
