MC74AC139DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74AC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC139 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Throw Configuration | DP4T |
| Propagation Delay | 13 ns |
| Quiescent Current | 8μA |
| Family | AC |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Number of Input Lines | 1 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74AC139DTR2 Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.Tape & Reel (TR) represents its packaging.Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 2V~6V, designers have greater flexibility of digital controlled switch.Multiplexers in the 74AC series are suitable for a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.There is a base part number 74AC139 that can be used to locate signal switch's related components as well.In multiplexer's system, 5V is the voltage supplied.There are 16 component pins in this turn signal switch.It employs GULL WING as the point at which conductors come to an end.Single is used as its supply type.There are 16 pins on it.The mounting point is Surface Mount.The AC family includes the logic switch.Keeping Vsup at 2V will prevent some unwanted failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 6V.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.Without any external influences, it consumes 8μA current of multiplexer ic at all times.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.In accordance with TAPE AND REEL, switches can be packaged.On the multiplexers, 1 input lines are provided for accepting voltage levels.Signal sources consist of output lines of 4.
MC74AC139DTR2 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
1 input lines
4 output lines
MC74AC139DTR2 Applications
There are a lot of ON Semiconductor MC74AC139DTR2 Signal Switches / Multiplexers / Decoders applications.
- Speed control of medern motors
- Speed synchronization of multiple motors in industries
- Signal router
- Microprocessor instruction decoding
- Data-routing applications
- Image transmission
- Automatic Monitoring systems
- Small scale TV wall
- RF-based home automation system
- Make full adder
