MC74AC161DG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | TCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 167MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC161 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 17.5 ns |
| Turn On Delay Time | 17.5 ns |
| Reset | Asynchronous |
| Family | AC |
| Logic Function | Counter |
| Direction | Up |
| Halogen Free | Halogen Free |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| fmax-Min | 95 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
MC74AC161DG Overview
In the 16-SOIC (0.154, 3.90mm Width)package, it is supplied. It is configured using 16terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. The device contains 1terminations. A total of 16pins are present on all components. Tubeis used to package it. As part of the circuit, there are 16pins that connect other components. It is mounted in the way of [0]. It is a member of the family [0]. Due to its membership in the 74ACseries, it is suitable for a variety of applications. A logic type of Binary Counter is adopted. A temperature of -40°C~85°Cshould be set for the operating environment. In this case, it is mounted with a Surface Mounttype. Providing a supply voltage of 2V~6Vallows it to operate more reliably. The are 4 bits information in the device. Based on the Pbfree code, the result may be yes. In terms of this electronic device, the features provided by TCO OUTPUTare of the utmost importance. Further related parts can be found under its base part number 74AC161. It takes supply voltage of 5V to operate. As low as 2V Vsup is the minimum supply voltage. The frequency of the device is 167MHz. It is possible to provide a voltage up to 6V (Vsup). There are 4 input lines for the input of binary data in the form of on/off signals.
MC74AC161DG Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
TCO OUTPUT
Operating supply voltage of 5V
Frequency of 167MHz
MC74AC161DG Applications
There are a lot of ON Semiconductor MC74AC161DG Counters & Dividers applications.
- Fixed and programmable counters greater than 10
- Time delay circuits
- Control counters
- Frequency dividers
- LINEARIZATION
- counting/frequency sy nthesizers-BCD output
- SQUARING
- Frequency dividing circuits
- ANALOG SIGNAL PROCESSING
- Programmable decade counters
