MC74AC161NG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | TCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 167MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC161 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 17.5 ns |
| Reset | Asynchronous |
| Family | AC |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| fmax-Min | 95 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74AC161NG Overview
The device is packaged in the 16-DIP (0.300, 7.62mm)type. For its configuration, 16terminations are used. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. The device has 1terminations. There are a total of 16 pins in all components. As a result, it is packaged as Tube. As part of the circuit, there are 16pins that connect other components. It is mounted using the way of [0]. It is a member of the family [0]. Due to its membership in the 74ACseries, it is suitable for a variety of applications. It is assumed that the logic type is [0]. -40°C~85°Cis the recommended operating temperature. Mounting type Through Holeis used. Providing a voltage of 2V~6Vensures higher reliability of operation. In this device, there is information of 4bits. As far as Pbfree code is concerned, the result may be yes. When it comes to this electronic device, TCO OUTPUT are much important features. It should be noted that there are more related parts under the 74AC161base part number. In order to operate, it requires a voltage of [0]. Supply voltage (Vsup) can be as low as 2V. It operates with the frequency of 167MHz. A maximum supply voltage (Vsup) is available up to 6V. A total of 4input lines are used to input binary data.
MC74AC161NG Features
Embedded in the 16-DIP (0.300, 7.62mm) package
TCO OUTPUT
Operating supply voltage of 5V
Frequency of 167MHz
MC74AC161NG Applications
There are a lot of ON Semiconductor MC74AC161NG Counters & Dividers applications.
- counting/frequency sy nthesizers-BCD output
- Frequency division
- Counter control/timers
- Clocks
- DIVISION
- Digital multiplexing and demultiplexing
- TRUE RMS-TO-DC CONVERSION
- Binary counter/decoder
- Frequency dividers
- MULTIPLICATION
