MC74AC273DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 14.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 5.5 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.05mm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74AC273DTR2G Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). It is included in the package Tape & Reel (TR). Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. A temperature of -40°C~85°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74AC series. It should not exceed 175MHzin terms of its output frequency. The list contains 1 elements. There are 20 terminations,The 74AC273 family contains this object. The power source is powered by 5V. Its input capacitance is 4.5pFfarads. An electronic device belonging to the family ACcan be found here. Surface Mount mounts this electronic component. As you can see from the design, it has pins with 20. This device's clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. The design is based on 8bits. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 2V. The superior flexibility of this circuit is achieved by using 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. Quiescent current is consumed by the D latch in the amount of 8μA.
MC74AC273DTR2G Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
MC74AC273DTR2G Applications
There are a lot of ON Semiconductor MC74AC273DTR2G Flip Flops applications.
- Supports Live Insertion
- Load Control
- Data storage
- Test & Measurement
- Automotive
- Safety Clamp
- Single Up Count-Control Line
- QML qualified product
- Data transfer
- Asynchronous counter
