MC74AC273DW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74AC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AC273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 5.5 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74AC273DW Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). It is included in the package Tube. As configured, the output uses Non-Inverted. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. In this case, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. The 74ACseries comprises this type of FPGA. There should be no greater frequency than 175MHzon its output. The list contains 1 elements. This process consumes 8μA quiescents. There are 20 terminations,It is a member of the 74AC273 family. A voltage of 5V provides power to the D latch. Its input capacitance is 4.5pF farads. It is a member of the ACfamily of D flip flop. Surface Mount mounts this electronic component. This board has 20 pins. There is a clock edge trigger type of Positive Edgeon this device. It is included in FF/Latches. This flip flop is designed with 8 Bits. In this case, the maximum supply voltage (Vsup) reaches 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. The superior flexibility of this product is achieved by using 8 circuits. This D flip flop is well suited for RAIL based on its reliable performance. High efficiency requires the supply voltage to be maintained at 5V.
MC74AC273DW Features
Tube package
74AC series
20 pins
8 Bits
MC74AC273DW Applications
There are a lot of ON Semiconductor MC74AC273DW Flip Flops applications.
- Bounce elimination switch
- Event Detectors
- Pattern generators
- Individual Asynchronous Resets
- Matched Rise and Fall
- Modulo – n – counter
- 2 – Bit synchronous counter
- Instrumentation
- Balanced 24 mA output drivers
- Cold spare funcion
