MC74AC273MELG
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74AC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 5.5 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74AC273MELG Overview
The package is in the form of 20-SOIC (0.209, 5.30mm Width). It is included in the package Tape & Reel (TR). The output it is configured with uses Non-Inverted. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. It is operating at a temperature of -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 74ACseries FPGA. This D flip flop should not have a frequency greater than 175MHz. In total, there are 1 elements. Despite external influences, it consumes 8μAof quiescent current. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74AC273 family contains this object. An input voltage of 5Vpowers the D latch. Its input capacitance is 4.5pF farads. In terms of electronic devices, this device belongs to the ACfamily of devices. The electronic part is mounted in the way of Surface Mount. The 20pins are designed into the board. This device's clock edge trigger type is Positive Edge. It is included in FF/Latches. An electronic part with 8bits has been designed. It reaches 6Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be above 2V. 8 circuits are used to achieve its superior flexibility. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. In order to ensure high efficiency, the supply voltage should remain at 5V.
MC74AC273MELG Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
MC74AC273MELG Applications
There are a lot of ON Semiconductor MC74AC273MELG Flip Flops applications.
- ESD performance
- QML qualified product
- Event Detectors
- Load Control
- Convert a momentary switch to a toggle switch
- Storage Registers
- Data transfer
- Guaranteed simultaneous switching noise level
- Differential Individual
- Single Down Count-Control Line
