MC74AC273NG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.259996g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 13 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 5.5 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 3.56mm |
| Length | 27.17mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74AC273NG Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. As part of the package Tube, it is embedded. T flip flop uses Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Through Hole. The supply voltage is set to 2V~6V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. It belongs to the 74ACseries of FPGAs. This D flip flop should not have a frequency greater than 175MHz. A total of 1elements are contained within it. It has been determined that there have been 20 terminations. It is a member of the 74AC273 family. The power source is powered by 5V. There is 4.5pF input capacitance for this T flip flop. The electronic device belongs to the ACfamily. A part of the electronic system is mounted in the way of Through Hole. With its 20pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. This flip flop is designed with 8 Bits. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normally, the supply voltage (Vsup) should be kept above 2V. Considering its reliability, this T flip flop is well suited for RAIL. In order to achieve high efficiency, the supply voltage should be maintained at 5V. This D latch consumes 8μA quiescent current at all. It is reported that there are 8 channels.
MC74AC273NG Features
Tube package
74AC series
20 pins
8 Bits
MC74AC273NG Applications
There are a lot of ON Semiconductor MC74AC273NG Flip Flops applications.
- Common Clocks
- CMOS Process
- EMI reduction circuitry
- Balanced 24 mA output drivers
- Data transfer
- Modulo – n – counter
- Functionally equivalent to the MC10/100EL29
- Asynchronous counter
- Balanced Propagation Delays
- Cold spare funcion
