MC74AC373DWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Inverting, Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 7 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 7.5ns |
| Height | 2.4mm |
| Length | 12.95mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74AC373DWG Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). A package of Tube has been used. The output it is configured with uses Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Surface Mount method. The voltage supply is 2V~6V. There is -40°C~85°C TA operating temperature. It is a type of FPGA belonging to the 74AC series. The design of this electronic part contains 8 bits. As far as this device is concerned, it has no terminations. This type belongs to the 74AC373 family. A 5V voltage supply is required for operation. The device is equipped with 20 pins. AC is the family name of this electronic device. There are 20 pins on it. Surface Mount is the method used for mounting this electronic part. This device has 2 ports that can be connected to it. Subcategory FF/Latches contains this part. Vsup reaches 6V as the maximum supply voltage. (Vsup) should be greater than 2V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. This device is well suited for RAIL based on its reliable performance. The 24mA output current gives it maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines. It consumes 8μA current from its quiescent state without being affected by external factors at all.
MC74AC373DWG Features
20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC373 family
20 pin count
20 pins
MC74AC373DWG Applications
There are a lot of ON Semiconductor MC74AC373DWG Latches applications.
- Four-bit storage with output enable
- Shift right with parallel loading
- Motor Drives
- High-speed logic
- OC-48 communication systems
- Display
- Serial Output Data Queuing
- Multistage ripple counting
- Hammer Device Information
- Stacked or Push-Down Registers
