MC74AC373DWR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | 74AC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AC373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 7 ns |
| Family | AC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 7.5ns |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74AC373DWR2 Overview
20-SOIC (0.295, 7.50mm Width) contains it. Packaged in the way of Tape & Reel (TR). The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. The temperature at which the machine is operating is -40°C~85°C TA. The 74AC series is associated with this FPGA. Electronic parts with 8 bits are designed for this application. The device consists of 20 terminations that are designed to be used in conjunction with it. 74AC373 is the family name of it. The device is operated when the supply voltage is set to 5V. With 20 pins, it is equipped. AC is the family name of this electronic device. With the design of the board, there are only 20 pins. This electronic part is mounted in the way of Surface Mount. This device has a total of 2 ports. Subcategory FF/Latches contains this part. It reaches 6V when the supply voltage (Vsup) reaches maximum. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. On the basis of its reliability, this device is well suited for TAPE AND REEL. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. In order to achieve its superior flexibility, 8 circuits are used.
MC74AC373DWR2 Features
20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC373 family
20 pin count
20 pins
MC74AC373DWR2 Applications
There are a lot of ON Semiconductor MC74AC373DWR2 Latches applications.
- Shift right with parallel loading
- Clocks
- Watches
- General-Purpose Register
- Stacked or Push-Down Registers
- Shift Registers
- Storage
- Address register
- Parallel data synchronization
- Counter control
