banner_page

MC74AC373N

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC373 8 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC74AC373N
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 538
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74AC Series 74AC373 8 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2009
Series 74AC
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory FF/Latches
Packing Method RAIL
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74AC373
Pin Count 8
Qualification Status Not Qualified
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Propagation Delay 9.5 ns
Turn On Delay Time 7 ns
Family AC
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Number of Input Lines 8
Independent Circuits 1
Number of Output Lines 3
Delay Time - Propagation 7.5ns
Height Seated (Max) 4.57mm
Width 7.62mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MC74AC373N Overview


In the 20-DIP (0.300, 7.62mm) package, it can be found as an embedded module. As a result, it has a packaging of Tube. In this configuration, the output is set to Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. Electronic parts are mounted in accordance with Through Hole. The voltage supply is 2V~6V. During operation, the temperature is set at -40°C~85°C TA. This FPGA is part of the 74AC series. This electronic part is designed with 8 Bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74AC373 family. It operates with a supply voltage of 5V. It is equipped with 8 pin count. There is a device in this electronic family called AC. With the design of the board, there are only 20 pins. Through Hole is the method used for mounting this electronic part. In this device, there are 2 ports. FF/Latches is the subcategory of this part. 6V is the maximum voltage (Vsup) that can be supplied. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. Input Lines consist of electronic circuits, and there are 8. Based on its reliable performance, this device is appropriate for RAIL. High efficiency requires a voltage supply of 5V. It follows that 3 output lines are generated from the binary equivalent of the input line.

MC74AC373N Features


20-DIP (0.300, 7.62mm) package
74AC series
8 Bits
74AC373 family
8 pin count
20 pins

MC74AC373N Applications


There are a lot of ON Semiconductor MC74AC373N Latches applications.

  • Watches
  • Shift left register
  • Control circuits
  • Parallel Input
  • Avionics
  • Multistage ripple counting
  • General-Purpose Register
  • Stacked or Push-Down Registers
  • Pattern generators
  • Frequency dividing

Write a review

Note: HTML is not translated!
    Bad           Good