MC74AC373NG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | AC |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Independent Circuits | 1 |
| Delay Time - Propagation | 7.5ns |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MC74AC373NG Overview
In the 20-DIP (0.300, 7.62mm) package, it can be found as an embedded module. It is packaged in the way of Tube. It uses Tri-State as the output. In this electrical device, the logic type is D-Type Transparent Latch. Based on the way of Through Hole, this electronic part is mounted. There is no supply voltage for this device. It operates at -40°C~85°C TA degrees Celsius. The 74AC series of FPGAs is the one this FPGA belongs to. Electronic parts with 8 bits are designed for this application. A device with this design has 20 terminations. A 5V voltage supply is required for operation. 8 pins are available on it. This electronic device is categorized as a AC electronic device. This device has 2 ports on board, which are all available at the same time. During this period, the maximum supply voltage (Vsup) reaches 6V. It is recommended that the supply voltage (Vsup) be greater than 2V.
MC74AC373NG Features
20-DIP (0.300, 7.62mm) package
74AC series
8 Bits
8 pin count
MC74AC373NG Applications
There are a lot of Rochester Electronics, LLC MC74AC373NG Latches applications.
- General-Purpose Register
- Shift left register
- Automotive Cluster
- Serial Output Data Queuing
- Frequency
- A/D and D/A conversion
- Counter control
- Address register
- Ring counter
- Buffer/Storage Registers
