Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Weight |
4.535924g |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2006 |
Series |
74AC |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Tin (Sn) |
Subcategory |
FF/Latches |
Packing Method |
RAIL |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
74AC373 |
Pin Count |
8 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
9.5 ns |
Turn On Delay Time |
7 ns |
Family |
AC |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Delay Time - Propagation |
7.5ns |
Height |
6.35mm |
Length |
8.89mm |
Width |
6.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
MC74AC373NG Overview
A package called 20-DIP (0.300, 7.62mm) contains it. Tube is the packaging method. It uses Tri-State as its output configuration. This electrical device has the logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Through Hole. A voltage of 2V~6V is used as the supply voltage for this device. It is -40°C~85°C TA at the operating temperature. 74AC is the series number of this FPGA. An electronic part with 8 bits is designed. A device with this design has 20 terminations. 74AC373 is its family. A 5V voltage supply is required for operation. 8 pins are provided. AC is the family name of this electronic device. It is designed with 20 pins. Through Hole is the way in which this electronic part is mounted. In this device, there are 2 ports. Subcategory FF/Latches contains this part. It reaches a maximum supply voltage (Vsup) of 6V. (Vsup) should be greater than 2V. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Considering the reliability of this device, it would be a good candidate for RAIL. With an output current of 24mA, it is highly flexible in terms of design. Optimal efficiency requires 5V as the supply voltage. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
MC74AC373NG Features
20-DIP (0.300, 7.62mm) package
74AC series
8 Bits
74AC373 family
8 pin count
20 pins
MC74AC373NG Applications
There are a lot of ON Semiconductor MC74AC373NG Latches applications.
- OC-48 communication systems
- Accumulator Registers
- General-Purpose Register
- Shift right with parallel loading
- A/D converters
- Parallel Output
- Stacked or Push-Down Registers
- Automotive Infotainment
- Programmable binary
- Bus system register with enable parallel lines at bus side