MC74AC374DWR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74AC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 155MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 8 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74AC374DWR2 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). A package named Tape & Reel (TR)includes it. As configured, the output uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. Powered by a 2V~6Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74AC series. Its output frequency should not exceed 155MHz. In total, it contains 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74AC374 family. A voltage of 5V is used as the power supply for this D latch. There is 4.5pF input capacitance for this T flip flop. ACis the family of this D flip flop. Electronic part Surface Mountis mounted in the way. This board has 20 pins. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with 8bits. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be kept above 2V. Its flexibility is enhanced by 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. A D flip flop with 2embedded ports is available. There are no output lines on the JK flip flop.
MC74AC374DWR2 Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
MC74AC374DWR2 Applications
There are a lot of ON Semiconductor MC74AC374DWR2 Flip Flops applications.
- Control circuits
- Computing
- Balanced 24 mA output drivers
- Reduced system switching noise
- Test & Measurement
- Matched Rise and Fall
- ATE
- Digital electronics systems
- EMI reduction circuitry
- Synchronous counter
