MC74AC374N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 155MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 8 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74AC374N Overview
In the form of 20-DIP (0.300, 7.62mm), it has been packaged. Package Tubeembeds it. T flip flop uses Tri-State, Non-Invertedas the output. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Through Hole. A 2V~6Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74ACseries FPGA. It should not exceed 155MHzin terms of its output frequency. The element count is 1 . Despite external influences, it consumes 8μAof quiescent current. It has been determined that there have been 20 terminations. It is a member of the 74AC374 family. Power is provided by a 5V supply. A JK flip flop with a 4.5pFfarad input capacitance is used here. It is a member of the ACfamily of D flip flop. The electronic part is mounted in the way of Through Hole. With its 20pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. It is part of the FF/Latchesbase part number family. Flip flops designed with 8bits are used in this part. As soon as 6Vis reached, Vsup reaches its maximum value. A normal operating voltage (Vsup) should remain above 2V. Its flexibility is enhanced by 8 circuits. A total of 2ports are embedded in the D flip flop. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It operates with 3 output lines.
MC74AC374N Features
Tube package
74AC series
20 pins
8 Bits
MC74AC374N Applications
There are a lot of ON Semiconductor MC74AC374N Flip Flops applications.
- ESD performance
- Computing
- Set-reset capability
- Control circuits
- Computers
- Load Control
- Patented noise
- Test & Measurement
- ESCC
- Latch
