MC74AC374NG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 155MHz |
| Family | AC |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MC74AC374NG Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. It is included in the package Tube. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. Through Holeis in the way of this electric part. A 2V~6Vsupply voltage is required for it to operate. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. The 74ACseries comprises this type of FPGA. You should not exceed 155MHzin the output frequency of the device. A total of 1elements are contained within it. Despite external influences, it consumes 8μAof quiescent current. 20terminations have occurred. Power is provided by a 5V supply. Input capacitance of this device is 4.5pF farads. It belongs to the family of electronic devices known as AC. It reaches the maximum supply voltage (Vsup) at 6V. Normally, the supply voltage (Vsup) should be kept above 2V. A total of 2ports are embedded in the D flip flop.
MC74AC374NG Features
Tube package
74AC series
MC74AC374NG Applications
There are a lot of Rochester Electronics, LLC MC74AC374NG Flip Flops applications.
- Frequency Divider circuits
- Reduced system switching noise
- Counters
- Buffer registers
- Bounce elimination switch
- Storage registers
- Buffered Clock
- Clock pulse
- Parallel data storage
- Count Modes
