MC74AC377DT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | 74AC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC377 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 140MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74AC377DT Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). A package named Tubeincludes it. As configured, the output uses Non-Inverted. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. This D latch has the type D-Type. The 74ACseries comprises this type of FPGA. Its output frequency should not exceed 140MHz Hz. A total of 1 elements are present. As a result, it consumes 8μA quiescent current. It has been determined that there have been 20 terminations. It is a member of the 74AC377 family. It is powered from a supply voltage of 5V. There is 4.5pF input capacitance for this T flip flop. The electronic device belongs to the ACfamily. This electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. There are 8bits in this flip flop. The maximal supply voltage (Vsup) reaches 6V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Despite its superior flexibility, it relies on 8 circuits to achieve it. In view of its reliability, this D flip flop is a good fit for RAIL. An electrical current of 3.3/5V volts is applied to it.
MC74AC377DT Features
Tube package
74AC series
20 pins
8 Bits
3.3/5V power supplies
MC74AC377DT Applications
There are a lot of ON Semiconductor MC74AC377DT Flip Flops applications.
- Reduced system switching noise
- Count Modes
- Asynchronous counter
- Bus hold
- Automotive
- Storage registers
- Buffer registers
- Memory
- Frequency Divider circuits
- Counters
