Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
Series |
74AC |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Type |
D-Type |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
FF/Latches |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Supply Voltage |
5V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74AC377 |
Function |
Standard |
Qualification Status |
Not Qualified |
Output Type |
Non-Inverted |
Number of Elements |
1 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
3.3/5V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Bits |
8 |
Clock Frequency |
140MHz |
Propagation Delay |
13 ns |
Turn On Delay Time |
2 ns |
Family |
AC |
Logic Function |
D-Type, Flip-Flop |
Current - Quiescent (Iq) |
8μA |
Current - Output High, Low |
24mA 24mA |
Max Propagation Delay @ V, Max CL |
10ns @ 5V, 50pF |
Trigger Type |
Positive Edge |
Input Capacitance |
4.5pF |
Clock Edge Trigger Type |
Positive Edge |
Max Frequency@Nom-Sup |
75000000Hz |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MC74AC377DWR2 Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. It is included in the package Tape & Reel (TR). As configured, the output uses Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 2V~6V volts. A temperature of -40°C~85°C TAis used in the operation. D-Typeis the type of this D latch. JK flip flop is a part of the 74ACseries of FPGAs. It should not exceed 140MHzin terms of its output frequency. In total, it contains 1 elements. It consumes 8μA of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74AC377, you will find similar parts. A voltage of 5V is used to power it. The input capacitance of this JK flip flopis 4.5pF farads. The electronic device belongs to the ACfamily. There is an electronic part that is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. It is included in FF/Latches. It is designed with 8bits. There is a 6Vmaximum supply voltage (Vsup). The supply voltage (Vsup) should be kept above 2V for normal operation. To achieve this superior flexibility, 8 circuits are used. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. There are 3.3/5V power supplies attached to it.
MC74AC377DWR2 Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
3.3/5V power supplies
MC74AC377DWR2 Applications
There are a lot of ON Semiconductor MC74AC377DWR2 Flip Flops applications.
- Pattern generators
- Digital electronics systems
- Computing
- Safety Clamp
- Differential Individual
- Clock pulse
- Frequency division
- Asynchronous counter
- Test & Measurement
- ESCC