MC74AC377DWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 140MHz |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74AC377DWR2G Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. As part of the package Tape & Reel (TR), it is embedded. The output it is configured with uses Non-Inverted. It is configured with the trigger Positive Edge. Surface Mountmounts this electrical part. A voltage of 2V~6Vis required for its operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. It belongs to the 74ACseries of FPGAs. You should not exceed 140MHzin its output frequency. In total, it contains 1 elements. There is 8μA quiescent consumption. The number of terminations is 20. It is a member of the 74AC377 family. It is powered from a supply voltage of 5V. Input capacitance of this device is 4.5pF farads. In this case, the D flip flop belongs to the ACfamily. The electronic part is mounted in the way of Surface Mount. There are 20pins on it. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. The flip flop is designed with 8bits. It reaches the maximum supply voltage (Vsup) at 6V. For normal operation, the supply voltage (Vsup) should be above 2V. 8 circuits are used to achieve its superior flexibility. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. It is recommended that the supply voltage be kept at 5Vto maximize efficiency.
MC74AC377DWR2G Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
MC74AC377DWR2G Applications
There are a lot of ON Semiconductor MC74AC377DWR2G Flip Flops applications.
- Circuit Design
- Power down protection
- Control circuits
- Synchronous counter
- QML qualified product
- Computing
- Common Clocks
- Frequency division
- Instrumentation
- CMOS Process
