MC74AC377N
| Parameters | |
|---|---|
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 140MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | 74AC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC377 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
MC74AC377N Overview
The flip flop is packaged in 20-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. In the configuration, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. Through Holemounts this electrical part. It operates with a supply voltage of 2V~6V. The operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74AC series. You should not exceed 140MHzin the output frequency of the device. The element count is 1 . It consumes 8μA of quiescent current without being affected by external factors. There are 20 terminations,This D latch belongs to the family of 74AC377. An input voltage of 5Vpowers the D latch. Its input capacitance is 4.5pFfarads. It is a member of the ACfamily of D flip flop. The electronic part is mounted in the way of Through Hole. The electronic flip flop is designed with pins 20. Its clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. The design is based on 8bits. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normal operation requires a supply voltage (Vsup) above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. High efficiency requires the supply voltage to be maintained at 5V.
MC74AC377N Features
Tube package
74AC series
20 pins
8 Bits
MC74AC377N Applications
There are a lot of ON Semiconductor MC74AC377N Flip Flops applications.
- Asynchronous counter
- Storage registers
- Counters
- Power down protection
- Frequency Divider circuits
- Safety Clamp
- Memory
- Instrumentation
- Data transfer
- Shift Registers
