MC74AC377NG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 140MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74AC377NG Overview
It is embeded in 20-DIP (0.300, 7.62mm) case. A package named Tubeincludes it. Currently, the output is configured to use Non-Inverted. This trigger uses the value Positive Edge. Through Holemounts this electrical part. With a supply voltage of 2V~6V volts, it operates. A temperature of -40°C~85°C TAis used in the operation. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74AC series. It should not exceed 140MHzin terms of its output frequency. The element count is 1 . There is a consumption of 8μAof quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74AC377, you will find similar parts. The power source is powered by 5V. Input capacitance of this device is 4.5pF farads. It is a member of the ACfamily of D flip flop. There is an electronic component mounted in the way of Through Hole. With its 20pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. This device is part of the FF/Latchesbase part number family. There are 8bits in its design. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. For normal operation, the supply voltage (Vsup) should be above 2V. 8 circuits are used to achieve its superior flexibility. If high efficiency is desired, the supply voltage should be kept at 5V.
MC74AC377NG Features
Tube package
74AC series
20 pins
8 Bits
MC74AC377NG Applications
There are a lot of ON Semiconductor MC74AC377NG Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Control circuits
- Count Modes
- Memory
- Matched Rise and Fall
- Set-reset capability
- Memory
- Digital electronics systems
- Differential Individual
- Data transfer
