MC74AC573DWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Inverting, Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 10 ns |
| Family | AC |
| Logic Function | Buffer, D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height | 2.4mm |
| Length | 12.95mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74AC573DWG Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). As a result, it has a packaging of Tube. The output it is configured with uses Tri-State. This electrical device has Logic type D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. It operates with a supply voltage of 2V~6V. During operation, the temperature is set at -40°C~85°C. An FPGA of this type belongs to the 74AC series. There are 8 bits in this electronic part. This device has been designed with 20 terminations available. This type belongs to the 74AC573 family. In order to function, the supply voltage should be set to 5V. There are 20 pins on it. This electronic device is categorized as a AC electronic device. In addition, it is designed with a pin number of 20. Electronic parts are mounted using the Surface Mount method. As far as ports are concerned, this device has 2 ports. The part is in the FF/Latches subcategory. It is possible to reach 6V when the maximum supply voltage (Vsup) has been reached. If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. Input Lines consist of electronic circuits, and there are 8. Considering the reliability of this device, it would be a good candidate for RAIL. High efficiency requires a voltage supply of 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines.
MC74AC573DWG Features
20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC573 family
20 pin count
20 pins
MC74AC573DWG Applications
There are a lot of ON Semiconductor MC74AC573DWG Latches applications.
- A/D converters
- Counters
- Pattern Generators
- Timers
- Shift left register
- Buffer/Storage Registers
- Network Switches
- Watches
- Buffer register
- Counting
