MC74AC573DWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 10 ns |
| Family | AC |
| Logic Function | Buffer, D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74AC573DWR2G Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). It is packaged in the way of Tape & Reel (TR). Tri-State is used for the output it is configured with. There is a logic type of D-Type Transparent Latch associated with this electrical device. The electronic component is mounted according to the Surface Mount method. A 2V~6V supply voltage is required to operate it. There is a temperature of -40°C~85°C at which the system operates. In the 74AC series, this FPGA is located. With this electronic part, there are 8 bits. This device has 20 terminations. There is no doubt that it belongs to the family 74AC573. The supply voltage of the device is 5V. 20 pins are included. This electronic device is categorized as a AC electronic device. With the design of the board, there are only 20 pins. Surface Mount is used to mount this electronic part. This device has a total of 2 ports. Subcategory FF/Latches includes this part. When Vsup reaches 6V, the maximal supply voltage is reached. A voltage greater than 2V must be supplied as a power supply (Vsup). It contains 8 input lines where electronic circuits are present. Considering the reliability of this device, it would be a good candidate for TR. Its 24mA output current allows for maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. It follows that 3 output lines are generated from the binary equivalent of the input line. Without external influences, it consumes 8μA of quiescent current.
MC74AC573DWR2G Features
20-SOIC (0.295, 7.50mm Width) package
74AC series
8 Bits
74AC573 family
20 pin count
20 pins
MC74AC573DWR2G Applications
There are a lot of ON Semiconductor MC74AC573DWR2G Latches applications.
- Buffer/Storage Registers
- Meter applications
- Automotive ADAS
- Instrumentation
- Shift right with parallel loading
- Pattern Generators
- PCs and Notebooks
- Display
- Parallel Input
- Relay
