MC74AC573NG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 10 ns |
| Family | AC |
| Logic Function | Buffer, D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height | 6.35mm |
| Length | 6.35mm |
| Width | 25.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74AC573NG Overview
In the package 20-DIP (0.300, 7.62mm), it can be found. A package of Tube has been used. In this configuration, the output is set to Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. This electronic part is mounted in the way of Through Hole. It operates with a supply voltage of 2V~6V. The temperature at which the machine is operating is -40°C~85°C. The 74AC series of FPGAs is the one this FPGA belongs to. The design of this electronic part contains 8 bits. In this device, there are 20 terminations. This type belongs to the 74AC573 family. The device works with a voltage of 5V for its supply voltage. The device is equipped with 20 pins. In the world of electronics, this electronic device belongs to the family of AC. The pin configuration of the device is 20. Through Hole is used to mount this electronic part. This device has 2 ports. It belongs to the subcategory of FF/Latches. When Vsup reaches 6V, the maximal supply voltage is reached. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. It contains 8 input lines where electronic circuits are present. Considering the reliability of this device, it would be a good candidate for RAIL. A high level of efficiency is achieved by maintaining the supply voltage at 5V. It follows that 3 output lines are generated from the binary equivalent of the input line.
MC74AC573NG Features
20-DIP (0.300, 7.62mm) package
74AC series
8 Bits
74AC573 family
20 pin count
20 pins
MC74AC573NG Applications
There are a lot of ON Semiconductor MC74AC573NG Latches applications.
- Accumulator Registers
- Parallel Output
- Flip-flops
- Parallel Input
- A/D and D/A conversion
- Sample and hold register
- Counters
- Serial Output Register
- Audio and video switching
- Display
