MC74AC574DW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 95MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74AC574DW Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). Package Tubeembeds it. This output is configured with Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. A supply voltage of 2V~6V is required for operation. It is operating at a temperature of -40°C~85°C TA. This logic flip flop is classified as type D-Type. In terms of FPGAs, it belongs to the 74AC series. You should not exceed 95MHzin its output frequency. The element count is 1 . As a result, it consumes 8μA quiescent current. Currently, there are 20 terminations. The object belongs to the 74AC574 family. It is powered by a voltage of 5V . The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. ACis the family of this D flip flop. The electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. 8bits are used in its design. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. To achieve this superior flexibility, 8 circuits are used. A D flip flop with 2embedded ports is available. For high efficiency, the supply voltage should be kept at 5V. The JK flip flop is with 3 output lines to operate.
MC74AC574DW Features
Tube package
74AC series
20 pins
8 Bits
MC74AC574DW Applications
There are a lot of ON Semiconductor MC74AC574DW Flip Flops applications.
- Memory
- Instrumentation
- Frequency Dividers
- CMOS Process
- Dynamic threshold performance
- Supports Live Insertion
- Circuit Design
- QML qualified product
- Single Down Count-Control Line
- Event Detectors
