MC74AC574DWG
| Parameters | |
|---|---|
| Max Frequency@Nom-Sup | 60000000Hz |
| Height | 2.4mm |
| Length | 12.95mm |
| Width | 7.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 95MHz |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
MC74AC574DWG Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. The package Tubecontains it. The output it is configured with uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 2V~6V. A temperature of -40°C~85°C TAis used in the operation. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74ACseries FPGA. It should not exceed 95MHzin its output frequency. The element count is 1 . It consumes 8μA of quiescent There have been 20 terminations. This D latch belongs to the family of 74AC574. It is powered by a voltage of 5V . A 4.5pFfarad input capacitance is provided by this T flip flop. An electronic device belonging to the family ACcan be found here. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has the clock edge trigger type of Positive Edge. This part is included in FF/Latches. It is designed with 8bits. 6Vis the maximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. Due to its superior flexibility, it uses 8 circuits. The D flip flop has no ports embedded. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 3 output lines in this JK flip flop.
MC74AC574DWG Features
Tube package
74AC series
20 pins
8 Bits
MC74AC574DWG Applications
There are a lot of ON Semiconductor MC74AC574DWG Flip Flops applications.
- Asynchronous counter
- Bounce elimination switch
- Reduced system switching noise
- Consumer
- Patented noise
- QML qualified product
- Supports Live Insertion
- Memory
- ESD performance
- Memory
