MC74AC574MELG
| Parameters | |
|---|---|
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 95MHz |
| Propagation Delay | 13.5 ns |
| Turn On Delay Time | 2 ns |
| Family | AC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 60000000Hz |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
MC74AC574MELG Overview
20-SOIC (0.209, 5.30mm Width)is the way it is packaged. Package Tape & Reel (TR)embeds it. This output is configured with Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. The JK flip flop operates with an input voltage of 2V~6V volts. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74ACseries contain this type of chip. A frequency of 95MHzshould be the maximum output frequency. There are 1 elements in it. As a result, it consumes 8μA quiescent current and is not affected by external forces. There are 20 terminations,D latch belongs to the 74AC574 family. A voltage of 5V provides power to the D latch. Its input capacitance is 4.5pF farads. In terms of electronic devices, this device belongs to the ACfamily of devices. The electronic part is mounted in the way of Surface Mount. This board has 20 pins. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. An electronic part designed with 8bits is used in this application. As soon as 6Vis reached, Vsup reaches its maximum value. The supply voltage (Vsup) should be maintained above 2V for normal operation. To achieve this superior flexibility, 8 circuits are used. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. There are 2 ports embedded in the flip flops. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. There are no output lines on the JK flip flop.
MC74AC574MELG Features
Tape & Reel (TR) package
74AC series
20 pins
8 Bits
MC74AC574MELG Applications
There are a lot of ON Semiconductor MC74AC574MELG Flip Flops applications.
- Storage Registers
- Computing
- Control circuits
- Bus hold
- Circuit Design
- Frequency Divider circuits
- ATE
- Data transfer
- Test & Measurement
- EMI reduction circuitry
