MC74AC74NG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Current Rating | 24μA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74AC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 160MHz |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 6 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 95000000Hz |
| Height | 3.683mm |
| Length | 19.558mm |
| Width | 6.604mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74AC74NG Overview
14-DIP (0.300, 7.62mm)is the packaging method. The package Tubecontains it. T flip flop is configured with an output of Differential. In the configuration of the trigger, Positive Edgeis used. Through Holeis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 2V~6V volts. The operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74AC series. You should not exceed 160MHzin its output frequency. As a result, it consumes 4μA of quiescent current without being affected by external factors. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74AC74family includes it. A voltage of 5V is used as the power supply for this D latch. A JK flip flop with a 4.5pFfarad input capacitance is used here. It belongs to the family of electronic devices known as AC. It is mounted by the way of Through Hole. It is designed with 14 pins. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. It reaches 6Vwhen the supply voltage is maximal (Vsup). The supply voltage (Vsup) should be kept above 2V for normal operation. Despite its superior flexibility, it relies on 2 circuits to achieve it. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It offers maximum design flexibility with its output current of 24mA. The JK flip flop is with 1 output lines to operate.
MC74AC74NG Features
Tube package
74AC series
14 pins
MC74AC74NG Applications
There are a lot of ON Semiconductor MC74AC74NG Flip Flops applications.
- ESD performance
- Latch
- Reduced system switching noise
- Frequency Divider circuits
- Bus hold
- Automotive
- Load Control
- Dynamic threshold performance
- Matched Rise and Fall
- Data storage
