MC74ACT05D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2001 |
| Series | 74ACT |
| JESD-609 Code | e0 |
| Feature | Open Drain |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Gates |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 6 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ACT05 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 8.5 ns |
| Quiescent Current | 4μA |
| Family | ACT |
| Logic Function | Buffer, Inverter |
| Current - Output High, Low | - 24mA |
| Logic Type | Inverter |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 9 ns |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Number of Input Lines | 6 |
| Height Seated (Max) | 1.75mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74ACT05D Overview
Packed in 14-SOIC (0.154, 3.90mm Width), the part is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tube. This logic works according to the Inverter principle. A voltage of 4.5V~5.5V is needed to ensure full function of the part. Operating temperature extended to -40°C~85°C. There is a hole in Surface Mount for mounting the part. The high and low state of output current is - 24mA. The 74ACT series contains it. There are 14 terminations totally. This part is equipped with 6 functions that will greatly enhance the user's experience. In ACT, this chip plays an important role. Use 74ACT05 when searching for device variants. The part body is injected with 14 pins. Surface Mount mounted, this logic device is widely used in many applications. Datasheets for functions of 14 pins are available. Quiescent parts have 4μA current flowing through them. This logic device is a typical Gates. There is 50pF load capacitance on the part. Devices require a voltage of 4.5V to be powered. Vsup reaches its maximum value at 5.5V. Power supplies required for this part are specified in the datasheet as 5V. This product has Open Drain. It enhances the performance of the part to have input lines of 6.
MC74ACT05D Features
Inverter Logic Type
Operating Temperature: -40°C~85°C
ACT Family
Quiescent Current: 4μA
MC74ACT05D Applications
There are a lot of ON Semiconductor MC74ACT05D Gates and Inverters applications.
- Urban rail vehicle
- Television
- Various travel, camping, medical emergency appliances
- Automotive voltage monitoring
- Troubleshooting & Judgment
- Small ground power station
- Photovoltaic system
- Overvoltage and undervoltage protection
- Air conditioner
- Range hood
