MC74ACT08D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2009 |
| Series | 74ACT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Gates |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ACT08 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Propagation Delay | 9 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 9 ns |
| Family | ACT |
| Logic Function | AND |
| Number of Inputs | 2 |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | AND Gate |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 10 ns |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74ACT08D Overview
As the part is packed in 14-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tube. A AND Gate logic principle is used to make it work. The part must have a voltage of 4.5V~5.5V in order to function properly. Increasing operating temperature to around -40°C~85°C. There is Surface Mount mounting in Surface Mount. Output current is 24mA 24mA in the high and low states. 74ACT is its series number. A total of 14 terminations have been recorded. Users will benefit significantly from 4 functions in this part. In ACT, this chip plays an important role. Search with 74ACT08 if you are looking for device variants. It is injected into the part body with 14 pins. The logic device can be mounted on the Surface Mount axis and is used in a wide range of applications. Datasheets for 14 pin functions are available upon request. Inputs for this part are 2. The part has 4μA current flowing through it in the quiescent state. The logic device shown here is a typical Gates. 4 circuits are used in this device. 50pF is the load capacitance of the part. Vsup reaches its maximum value at 5.5V. The method RAIL has been incorporated into the package. According to the datasheets, the part requires 5V power supplies.
MC74ACT08D Features
AND Gate Logic Type
Operating Temperature: -40°C~85°C
ACT Family
Quiescent Current: 4μA
MC74ACT08D Applications
There are a lot of ON Semiconductor MC74ACT08D Gates and Inverters applications.
- Electric grinding wheel
- Massager
- Urban rail vehicle
- Audio
- Overcurrent/Short circuit protection
- VCR
- Agriculture and light complementary power station
- Hair dryer
- Photovoltaic grid-connected power system
- Fan
