MC74ACT138D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| Series | 74ACT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | 3 ENABLE INPUTS |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ACT138 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 3:8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Family | ACT |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Output Polarity | INVERTED |
| Max I(ol) | 0.024 A |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74ACT138D Overview
Digital switch is provided in the 16-SOIC (0.154, 3.90mm Width) for the purpose of saving board space.The package is in the form of Tube.For mounting, digital switch ic uses the method Surface Mount.Decoder/Demultiplexer is the analog IC that the multiplexers uses.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.Since they are members of the 74ACT series, they can be used in a wide variety of applications.There is a design for terminating 16 as part of its basic configuration.The base part number is 74ACT138, which is also useful when looking up signal switch's related components.The multiplexer is supplied with 5V voltage.This turn signal switch has a total of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is employed as its supply type.It is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch belongs to the family of ACT.The minimal supply voltage (Vsup) should be kept at 4.5V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V so as to avoid some unnecessary failures.Normally, 5V is powered by a battery.The digital switch ic is an electronic part classified into Decoder/Drivers.Signal sources consist of output lines of 8.In addition, it provides improved features of 3 ENABLE INPUTS.
MC74ACT138D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
8 output lines
3 ENABLE INPUTS
MC74ACT138D Applications
There are a lot of ON Semiconductor MC74ACT138D Signal Switches / Multiplexers / Decoders applications.
- Speed control of medern motors
- Metal detectors
- Data collection system
- Speed synchronization of multiple motors in industries
- Video transmission
- Audio transmission
- Data distribution
- Used to connect a single source to multiple destinations
- Control unit of Central Processing unit (CPU)
- Analog, digital or video signal switching
