banner_page

MC74ACT139DTR2

16 Terminations4.5V~5.5V 74ACT139 Signal switch74ACT Series 2 Functions


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC74ACT139DTR2
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 210
  • Description: 16 Terminations4.5V~5.5V 74ACT139 Signal switch74ACT Series 2 Functions(Kg)

Details

Tags

Parameters
Circuit 1 x 2:4
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Load Capacitance 50pF
Family ACT
Current - Output High, Low 24mA 24mA
Output Polarity INVERTED
Prop. Delay@Nom-Sup 11 ns
Propagation Delay (tpd) 10.5 ns
Voltage Supply Source Single Supply
Independent Circuits 2
Input Conditioning STANDARD
Length 5mm
Width 4.4mm
RoHS Status Non-RoHS Compliant
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Published 2012
Series 74ACT
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Decoder/Demultiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Decoder/Drivers
Packing Method TAPE AND REEL
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 74ACT139
Pin Count 16
JESD-30 Code R-PDSO-G16
Qualification Status Not Qualified

MC74ACT139DTR2 Overview


In order to conserve board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.With the 74ACT series, the multiplexers are suitable for a diverse range of applications.There is a design for terminating 16 as part of its basic configuration.There is a base part number of 74ACT139 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, 5V voltage is supplied.A component pin count of 16 can be found on this turn signal switch.GULL WING represents the end of conductors.Among the family of ACT the logic switch is a member.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4.5V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.For mux switch's normal operation, there is a power supply provided at 5V.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.In accordance with TAPE AND REEL, switches can be packaged.

MC74ACT139DTR2 Features


Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Power supplies of 5V

MC74ACT139DTR2 Applications


There are a lot of ON Semiconductor MC74ACT139DTR2 Signal Switches / Multiplexers / Decoders applications.

  • Textile mills
  • Control unit of Central Processing unit (CPU)
  • Logic gates for other digital devices
  • RF-based home automation system
  • Automatic Monitoring systems
  • Small scale TV wall
  • High-performance memory systems
  • Electronically controlled engine system
  • Enabling different functions units in microprocessor instruction decoding
  • Data communication

Write a review

Note: HTML is not translated!
    Bad           Good