MC74ACT139DTR2G
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT139 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Throw Configuration | DP4T |
| Propagation Delay | 11 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 11 ns |
| Family | ACT |
| Logic Function | Decoder, Demultiplexer |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Number of Input Lines | 1 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
MC74ACT139DTR2G Overview
In order to conserve board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The analog IC used in the multiplexers can be referred to as Decoder/Demultiplexer.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.The multiplexers from 74ACT series can be used for a wide range of applications.There are 16 terminations included in its basic configuration.The base part number is 74ACT139, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.This turn signal switch consists of 16 component pins.As the end of conductors, it uses GULL WING.There is a type of supply Single that is employed in this case.This multiplexer ic has 16 pins configured.It is mounted in the way of Surface Mount.The logic switch is a member of the family of ACT.A power supply is provided for mux switch's normal operation of 5V.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.There are no external influences on this multiplexer ic, so it consumes 8μA current.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.TAPE AND REEL is used to package the switches.The multiplexers have 1 input lines used to accept voltage levels.There are 4 output lines on the signal source.
MC74ACT139DTR2G Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
1 input lines
4 output lines
MC74ACT139DTR2G Applications
There are a lot of ON Semiconductor MC74ACT139DTR2G Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- Recording transmission
- Automation system
- War field flying robot with a night vision flying camera
- Robotic vehicles
- Microprocessor memory systems
- Memory chips
- Enabling block of memory depending on address in memory chips
- Time division multiplexing system
- Implementing boolean functions with multiple variables
