MC74ACT139NG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Tin (Sn) |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT139 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Throw Configuration | DP4T |
| Propagation Delay | 11 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 11 ns |
| Family | ACT |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Number of Input Lines | 1 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74ACT139NG Overview
Due to the lack of space on the board, digital switch is provided in the 16-DIP (0.300, 7.62mm).In this case, it is packaged as Tube.In terms of mounting, digital switch ic uses the method of Through Hole.Decoder/Demultiplexer is the analog IC that the multiplexers uses.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.Several applications are possible for 74ACT series multiplexers.It is designed with 16 terminations as part of its basic configuration.The base part number is 74ACT139, which is also useful when looking up signal switch's related components.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 16 is found on this turn signal switch.In this case, Single is employed as the supply type.With 16 pins, it is configured.The mounting point is Through Hole.The logic switch object belongs to the family of ACT.In order for 5V to operate normally, a power supply is provided.In electronic terms, the digital switch ic is classified as Decoder/Drivers.Not being affected by the external factors, consumes 8μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.Voltage levels are accepted through 1 input lines of multiplexers.As the signal source, there are 4 output lines.
MC74ACT139NG Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
1 input lines
4 output lines
MC74ACT139NG Applications
There are a lot of ON Semiconductor MC74ACT139NG Signal Switches / Multiplexers / Decoders applications.
- Seven segment displays
- CPU memory location identification
- To select different devices in microprocessor output
- Metal detectors
- Speed control of medern motors
- Speed synchronization of multiple motors in industries
- Used to connect a single source to multiple destinations
- Decimal decoder
- Injectors
- HDMI applications
