banner_page

MC74ACT157DTR2

16 Terminations4.5V~5.5V Signal switch74ACT Series 1 Outputs4 Functions


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-MC74ACT157DTR2
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 527
  • Description: 16 Terminations4.5V~5.5V Signal switch74ACT Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74ACT
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Multiplexer
Terminal Finish NICKEL PALLADIUM GOLD
Additional Feature TTL COMPATIBLE INPUTS
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 16
Number of Outputs 1
Qualification Status Not Qualified
Circuit 4 x 2:1
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 4.5V
Family ACT
Number of Inputs 2
Current - Output High, Low 24mA 24mA
Output Polarity TRUE
Propagation Delay (tpd) 8.5 ns
Voltage Supply Source Single Supply
Independent Circuits 1
Length 5mm
Width 4.4mm
RoHS Status ROHS3 Compliant

MC74ACT157DTR2 Overview


Due to the fact that it is provided in the 16-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) is the packaging method.Digital switch ic uses a Surface Mount mounting method.The analog IC used in the multiplexers can be referred to as Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Multiplexers of the 74ACT series can be used in a wide range of applications.Among its basic features are 16 terminations.For multiplexer's system, a voltage of 5V is supplied.There are 16 component pins in this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The logic switch object belongs to the family of ACT.Vsup should be kept at 4.5V to prevent some unnecessary failures.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.This turn signal switch has 1 outputs designed for its operation.It is provided with 2 inputs.In addition, it provides improved features of TTL COMPATIBLE INPUTS.

MC74ACT157DTR2 Features


Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
TTL COMPATIBLE INPUTS

MC74ACT157DTR2 Applications


There are a lot of Rochester Electronics, LLC MC74ACT157DTR2 Signal Switches / Multiplexers / Decoders applications.

  • Enabling different rows of memory depending on address in memory chips
  • To select different devices in microprocessor input
  • Metal detectors
  • Image transmission
  • High-performance memory-decoding applications
  • Code converters
  • Recording transmission
  • Electronics industry
  • Encrypted communications system
  • Robotic vehicles

Write a review

Note: HTML is not translated!
    Bad           Good