MC74ACT157N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | TIN LEAD |
| Additional Feature | TTL COMPATIBLE INPUTS |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Family | ACT |
| Number of Inputs | 2 |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Propagation Delay (tpd) | 8.5 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 4.44mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MC74ACT157N Overview
In order to conserve board space, digital switch is included in the 16-DIP (0.300, 7.62mm).It is packaged in the way of Tube.digital switch ic uses the method of Through Hole for mounting.In the multiplexers, the analog IC Multiplexer is used.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.The multiplexers can be used for a wide range of applications since they are members of 74ACT series.Among its basic configurations are 16 terminations.The multiplexer's system is powered by 5V volts.This turn signal switch has 16 component pins.The logic switch is a member of the family of ACT.Vsup should be kept at 4.5V to prevent some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 5.5V.In order for the turn signal switch to work, there are 1 outputs.In this multiplexer, there is a total of 2 inputs.The characteristics of TTL COMPATIBLE INPUTS are also improved.
MC74ACT157N Features
Supplied in the 16-DIP (0.300, 7.62mm) package
TTL COMPATIBLE INPUTS
MC74ACT157N Applications
There are a lot of Rochester Electronics, LLC MC74ACT157N Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Data bus control
- CPU memory location identification
- To select different task for memory in microprocessor memory systems
- Night vision cameras
- To select different devices in microprocessor input
- High-performance memory-decoding applications
- Make half adder
- Enabling block of memory depending on address in memory chips
- Textile mills
