MC74ACT161DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | TCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT161 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 14.5 ns |
| Turn On Delay Time | 14.5 ns |
| Reset | Asynchronous |
| Family | ACT |
| Logic Function | Counter |
| Direction | Up |
| Halogen Free | Halogen Free |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74ACT161DG Overview
It is a device supplied in the 16-SOIC (0.154, 3.90mm Width) package. This configuration uses 16terminations. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. In this diagram, there are 1elements that are interconnected by wires. There are 16pins on all components. Tubeis used to package it. In the circuit, there are 16pins that connect other parts. The way of Surface Mount is used to mount it. In this case, it belongs to the family of [0]. As a member of the 74ACTseries, it is ideal for a wide range of applications. It is assumed that the logic type is [0]. It is recommended to set the operating temperature to -40°C~85°C. The mounting type is Surface Mount. When the supply voltage is set to [0], it is able to operate with greater reliability. The device contains 4bits of information. Pbfree code may produce the result yes. In terms of this electronic device, the features provided by TCO OUTPUTare of the utmost importance. Among its base part number [0], you will find additional parts that are related. In this case, there is 5V voltage coming from the voltage source. It takes supply voltage of 5V to operate. A frequency of 125MHzis used for operation. A total of 4lines are used for inputting binary data.
MC74ACT161DG Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
TCO OUTPUT
Operating supply voltage of 5V
Frequency of 125MHz
MC74ACT161DG Applications
There are a lot of ON Semiconductor MC74ACT161DG Counters & Dividers applications.
- POWER COMPUTATION
- Timers
- Clocks
- Up Counters
- TRUE RMS-TO-DC CONVERSION
- VHF, UHF, FM, AM, etc.
- Signal gating
- MULTIPLICATION
- Divide-by-N counting
- Counter control/timers
