MC74ACT161DR2
| Parameters | |
|---|---|
| Timing | Synchronous |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Lead (Sn80Pb20) |
| Additional Feature | TCO OUTPUT |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ACT161 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 14.5 ns |
| Reset | Asynchronous |
| Family | ACT |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 125MHz |
MC74ACT161DR2 Overview
This device is supplied in the 16-SOIC (0.154, 3.90mm Width) package. For its configuration, 16terminations are used. Having a supply voltage of 5V enables to operate in a fully flexible manner. In this diagram, there are 1elements that are interconnected by wires. A total of 16pins are available on all components. It is packaged in a manner consistent with Tape & Reel (TR). As part of the circuit, there are 16pins used to connect other components. The device is mounted in the direction of [0]. In this case, it appears as a member of the ACT family. The 74ACTseries offers a wide range of applications due to its versatility. Binary Counteris selected as the logic type. Setting the operating temperature to -40°C~85°C is recommended. A mounting type of Surface Mountis adopted. When a supply voltage of 4.5V~5.5Vis provided, it can operate with greater reliability. This device contains information in 4bits. When it comes to this electronic device, TCO OUTPUT are much important features. Its base part number, [0], contains more related parts. The packing of the product is carried out by [0]. As a result of the voltage source, there is 5V voltage. The maximum supply voltage (Vsup) is up to 5.5V. 4input lines are used to input binary data as on/off signals.
MC74ACT161DR2 Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
TCO OUTPUT
MC74ACT161DR2 Applications
There are a lot of ON Semiconductor MC74ACT161DR2 Counters & Dividers applications.
- Frequency division
- Counter control/timers
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Analog multiplexing and demultiplexing
- Timers
- Time-delay circuits
- counting/frequency sy nthesizers-BCD output
- VHF, UHF, FM, AM, etc.
- Divide-by-N counting
- Binary counter/decoder
