MC74ACT161MEL
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 16 |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Counters |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Family | ACT |
| Logic IC Type | BINARY COUNTER |
| Max I(ol) | 0.024 A |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 11.5 ns |
| fmax-Min | 100 MHz |
| Count Direction | UP |
| Max Frequency@Nom-Sup | 105000000Hz |
| Load/Preset Input | YES |
| Mode of Operation | SYNCHRONOUS |
| Height Seated (Max) | 2.05mm |
| Length | 10.2mm |
| Width | 5.275mm |
| RoHS Status | Non-RoHS Compliant |
MC74ACT161MEL Overview
There are 16 terminations used for its configuration. The supply voltage of 5V enables it operate in a fully flexible way. In all, there are 16 pins on each component. As part of the circuit, there are 16pins used to connect other components. In this case, it emerges as a member of the ACT family. The device stores 4bits of information. This device is manufactured in the temperature grade of INDUSTRIAL. It is packed with [0]. In this case, 5Vvoltage is generated by the voltage source. The device requires a supply voltage of [0]. A voltage of 4.5V is the minimum supply voltage (Vsup). Countersis the family name of the electronic part. The logic IC type is [0]. Temperatures above 85°Care considered to be the maximum operating temperature. As a general rule, it is recommended that the minimum operating temperature be set to -40°C.
MC74ACT161MEL Features
Operating supply voltage of 5.5V
BINARY COUNTER as logic IC type
MC74ACT161MEL Applications
There are a lot of ON Semiconductor MC74ACT161MEL Counters & Dividers applications.
- Time-delay circuits
- MULTIPLICATION
- counting/frequency sy nthesizers-BCD output
- POWER COMPUTATION
- SQUARING
- ANALOG SIGNAL PROCESSING
- Communications Digital Frequency Synthesizers;
- LINEARIZATION
- Digital multiplexing and demultiplexing
- VHF, UHF, FM, AM, etc.
