MC74ACT245N
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 20 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Number of Terminations | 20 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH COMMON OUTPUT ENABLE AND DIRECTION CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Family | ACT |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Max I(ol) | 0.024 A |
| Prop. Delay@Nom-Sup | 9 ns |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | COMMON CONTROL |
| Translation | N/A |
| Height Seated (Max) | 4.57mm |
| Length | 26.415mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
MC74ACT245N Overview
Logical driver uses a neat PDIP package. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Family ACT includes the buffer IC . 20 pins are set with the electric part. Logical driver has 20 pins. Enhanced with 2 ports. The digital buffer starts up under COMMON CONTROL control technology. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features WITH COMMON OUTPUT ENABLE AND DIRECTION CONTROL to better serve the need. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 24mA to its low level. In high level output mode, the electronic parts may conduct -24mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V.
MC74ACT245N Features
WITH COMMON OUTPUT ENABLE AND DIRECTION CONTROL
High Level Output: 24mA
Low Level Output: -24mA
MC74ACT245N Applications
There are a lot of ON Semiconductor MC74ACT245N Buffers & Transceivers applications.
- Single to Multimode Fiber Conversion
- Remote controls
- Wireless showroom
- SONET/SDH Network
- Mainframes, workstations or storage devices
- Fiber-to-the-desktop
- Changeing the frequency from IF to RF
- Wireless teaching
- Cell phones
- Fast Ethernet
