MC74ACT259N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| Series | 74ACT |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ACT259 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Standard |
| Circuit | 1:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 6.5 ns |
| Family | ACT |
| Logic Function | D-Type, Shift Register |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type, Addressable |
| Max I(ol) | 0.024 A |
| Trigger Type | LOW LEVEL |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 4.44mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74ACT259N Overview
In the 16-DIP (0.300, 7.62mm) package, it is embedded. Tube is the way it is packaged. Standard is used for the output it is configured with. There is a logic type of D-Type, Addressable associated with this electrical device. Based on the way of Through Hole, this electronic part is mounted. The supply voltage of the device is 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. The 74ACT series of FPGAs is the one this FPGA belongs to. An electronic part with 1 bits is designed. This device has 16 terminations. It belongs to 74ACT259 family. A 5V voltage supply is required for operation. The device is equipped with 16 pins. In the world of electronics, this electronic device belongs to the family of ACT. The pin configuration of the device is 16. It is mounted according to the Through Hole method. It belongs to the subcategory of FF/Latches. There is a maximum voltage supply (Vsup) that reaches 5.5V. The system is powered by 5V sources. It is recommended to have a higher supply voltage (Vsup) than 4.5V. An electronic circuit can be found on 1 input lines. Based on its reliable performance, this device is well suited to RAIL. Input lines are generated as binary equivalents by 8 output lines.
MC74ACT259N Features
16-DIP (0.300, 7.62mm) package
74ACT series
1 Bits
74ACT259 family
16 pin count
16 pins
5V power supplies
MC74ACT259N Applications
There are a lot of ON Semiconductor MC74ACT259N Latches applications.
- Display driver
- Decade counting 7-segment decimal display
- Storage
- Buffer Storage
- Meter applications
- Automotive Infotainment
- Buffer/Storage Registers
- Shift Registers
- Watches
- Hammer Device Information
