MC74ACT273MG
| Parameters | |
|---|---|
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 6.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
MC74ACT273MG Overview
The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). D flip flop is included in the Tubepackage. In the configuration, Non-Invertedis used as the output. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Currently, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74ACTseries contain this type of chip. A frequency of 200MHzshould not be exceeded by its output. D latch consists of 1 elements. There is a consumption of 8μAof quiescent energy. Terminations are 20. The 74ACT273 family contains it. The power supply voltage is 5V. The input capacitance of this JK flip flopis 4.5pF farads. In this case, the D flip flop belongs to the ACTfamily. There is an electronic component mounted in the way of Surface Mount. This board has 20 pins. This device's clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. 8 circuits are used to achieve its superior flexibility. Considering the reliability of this T flip flop, it is well suited for RAIL. The power supply is 5V. The supply voltage should be maintained at 5V for high efficiency.
MC74ACT273MG Features
Tube package
74ACT series
20 pins
8 Bits
5V power supplies
MC74ACT273MG Applications
There are a lot of ON Semiconductor MC74ACT273MG Flip Flops applications.
- Balanced 24 mA output drivers
- Balanced Propagation Delays
- CMOS Process
- Pattern generators
- ESD performance
- Shift registers
- Storage registers
- Control circuits
- Registers
- Computing
