MC74ACT273NG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Master Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 200MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
MC74ACT273NG Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. The package Tubecontains it. T flip flop uses Non-Invertedas the output. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Through Hole. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis used in the operation. D-Typeis the type of this D latch. In this case, it is a type of FPGA belonging to the 74ACT series. Its output frequency should not exceed 200MHz Hz. In total, there are 1 elements. It consumes 8μA of quiescent There are 20 terminations,It is powered from a supply voltage of 5V. The input capacitance of this JK flip flopis 4.5pF farads. A device of this type belongs to the family of ACT. As soon as 5.5Vis reached, Vsup reaches its maximum value. For normal operation, the supply voltage (Vsup) should be above 4.5V.
MC74ACT273NG Features
Tube package
74ACT series
MC74ACT273NG Applications
There are a lot of Rochester Electronics, LLC MC74ACT273NG Flip Flops applications.
- Test & Measurement
- Storage Registers
- Counters
- Frequency Divider circuits
- Shift registers
- Load Control
- Digital electronics systems
- Bus hold
- Safety Clamp
- Single Down Count-Control Line
