MC74ACT273NG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Current Rating | 24μA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 6.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height | 6.35mm |
| Length | 6.35mm |
| Width | 25.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74ACT273NG Overview
It is packaged in the way of 20-DIP (0.300, 7.62mm). The Tubepackage contains it. T flip flop uses Non-Invertedas its output configuration. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. -40°C~85°C TAis the operating temperature. This D latch has the type D-Type. It belongs to the 74ACTseries of FPGAs. In order for it to function properly, its output frequency should not exceed 200MHz. In total, it contains 1 elements. There is 8μA quiescent consumption. A total of 20terminations have been recorded. It is a member of the 74ACT273 family. An input voltage of 5Vpowers the D latch. This JK flip flop has a 4.5pFfarad input capacitance. It belongs to the family of electronic devices known as ACT. In this case, the electronic component is mounted in the way of Through Hole. A total of 20pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. This device has the base part number FF/Latches. This flip flop is designed with 8 Bits. Its flexibility is enhanced by 8 circuits. As a result of its reliable performance, this T flip flop is suitable for RAIL. The D latch runs on a voltage of 5V volts. For high efficiency, the supply voltage should be kept at 5V. It offers maximum design flexibility with its output current of 24mA.
MC74ACT273NG Features
Tube package
74ACT series
20 pins
8 Bits
5V power supplies
MC74ACT273NG Applications
There are a lot of ON Semiconductor MC74ACT273NG Flip Flops applications.
- Buffered Clock
- Storage registers
- Data transfer
- ESCC
- Frequency Divider circuits
- Frequency division
- Balanced 24 mA output drivers
- Computers
- Frequency Dividers
- Differential Individual
