banner_page

MC74ACT373DTR2

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT373 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-MC74ACT373DTR2
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 619
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT373 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2011
Series 74ACT
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 74ACT373
Pin Count 20
Qualification Status Not Qualified
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Propagation Delay 10 ns
Turn On Delay Time 7 ns
Family ACT
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Number of Input Lines 8
Independent Circuits 1
Number of Output Lines 3
Delay Time - Propagation 8.5ns
Length 6.5mm
Width 4.4mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MC74ACT373DTR2 Overview


There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). This package has the format of Tape & Reel (TR). It uses Tri-State as the output. There is D-Type Transparent Latch logic type for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. A voltage of 4.5V~5.5V is used as the supply voltage for this device. There is a temperature of -40°C~85°C TA at which the system operates. The 74ACT series of FPGAs is the one this FPGA belongs to. An electronic part with 8 bits is designed. This device has been designed with 20 terminations available. The family 74ACT373 includes it. With a supply voltage of 5V, it operates. With 20 pins, it is equipped. This electronic device belongs to the family of ACT. The pin configuration of the device is 20. The electronic part is mounted using the Surface Mount method. This device has 2 ports. FF/Latches is the subcategory of this part. There is 5V power supply for it. An electronic circuit can be found on 8 input lines. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines.

MC74ACT373DTR2 Features


20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies

MC74ACT373DTR2 Applications


There are a lot of ON Semiconductor MC74ACT373DTR2 Latches applications.

  • Relay replacement
  • Buffer Storage
  • Control circuits
  • Pattern generators
  • Parallel data synchronization
  • Storage
  • Counter timers
  • Stacked or Push-Down Registers
  • Address register
  • Multi-line decoders

Write a review

Note: HTML is not translated!
    Bad           Good