MC74ACT373DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 7 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 8.5ns |
| Height | 1.05mm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74ACT373DTR2G Overview
20-TSSOP (0.173, 4.40mm Width) contains it. Packaged in the way of Tape & Reel (TR). In its configuration, Tri-State is used as the output. This electrical device has a logic type of D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 4.5V~5.5V voltage supply is required for operation. During operation, the temperature is set at -40°C~85°C TA. In the 74ACT series, this FPGA is located. This electronic part is designed with 8 Bits. In this device, there are 20 terminations. This type belongs to the 74ACT373 family. The supply voltage of the device is 5V. 20 pins are provided. This electronic device belongs to the family of ACT. The device has 20 pins. Electronic parts are mounted using the Surface Mount method. This device has 2 ports. This part can be found within the FF/Latches subcategory. 5V power supplies are needed to operate it. Input Lines consist of electronic circuits, and there are 8. Based on its reliable performance, this device is appropriate for TAPE AND REEL. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There are 3 output lines that correspond to the binary equivalents of the input line. It consumes 8μA of quiescent current without being affected by outside factors.
MC74ACT373DTR2G Features
20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
MC74ACT373DTR2G Applications
There are a lot of ON Semiconductor MC74ACT373DTR2G Latches applications.
- A/D converters
- Lamp and Display (LED)
- Flip-flops
- Parallel Input
- Watches
- Frequency dividing
- Parallel-to-Serial Data Conversion
- Decade counting
- Clocks
- High-speed logic
