Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2006 |
Series |
74ACT |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74ACT373 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.5V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
10 ns |
Turn On Delay Time |
7 ns |
Family |
ACT |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Delay Time - Propagation |
8.5ns |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MC74ACT373DW Overview
Package 20-SOIC (0.295, 7.50mm Width) includes it. It is packaged in the way of Tube. Tri-State is the output configured for it. A D-Type Transparent Latch logic type is used in this electrical device. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V, it operates. The temperature at which the machine is operating is -40°C~85°C TA. This FPGA is part of the 74ACT series. There are 8 bits in this electronic part. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74ACT373 family. In order to function, the supply voltage should be set to 5V. The device is equipped with 20 pins. ACT is the family of this electronic device. With the design of the board, there are only 20 pins. Surface Mount is used to mount this electronic part. In this device, there is a total of 2 ports available for use. This part is included in FF/Latches. Vsup reaches 5.5V as the maximum supply voltage. The system is powered by 5V sources. It is recommended to have a higher supply voltage (Vsup) than 4.5V. A binary equivalent of the input line is generated by the 3 output lines. Its superior flexibility is achieved by using 8 circuits.
MC74ACT373DW Features
20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pin count
20 pins
5V power supplies
MC74ACT373DW Applications
There are a lot of ON Semiconductor MC74ACT373DW Latches applications.
- Buffer register
- Relay replacement
- Programmable binary
- Avionics
- Parallel data synchronization
- Timers
- Shift Registers
- Hammer Device Information
- Lamp and Display (LED)
- Counters