MC74ACT374NG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 160MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| RoHS Status | ROHS3 Compliant |
MC74ACT374NG Overview
The flip flop is packaged in 20-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. As configured, the output uses Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. Through Holeis in the way of this electric part. A 4.5V~5.5Vsupply voltage is required for it to operate. Currently, the operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. There should be no greater frequency than 160MHzon its output. A total of 1elements are contained within it. It consumes 8μA of quiescent A 4.5pFfarad input capacitance is provided by this T flip flop.
MC74ACT374NG Features
Tube package
74ACT series
MC74ACT374NG Applications
There are a lot of Rochester Electronics, LLC MC74ACT374NG Flip Flops applications.
- Clock pulse
- Guaranteed simultaneous switching noise level
- Load Control
- Counters
- Buffered Clock
- Asynchronous counter
- Shift Registers
- Individual Asynchronous Resets
- Functionally equivalent to the MC10/100EL29
- Communications
