MC74ACT377DWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 140MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 3 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74ACT377DWR2G Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. You can find it in the Tape & Reel (TR)package. It is configured with Non-Invertedas an output. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. The operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. JK flip flop is a part of the 74ACTseries of FPGAs. This D flip flop should not have a frequency greater than 140MHz. In total, it contains 1 elements. T flip flop consumes 8μA quiescent energy. There are 20 terminations,The object belongs to the 74ACT377 family. The power source is powered by 5V. Input capacitance of this device is 4.5pF farads. The electronic device belongs to the ACTfamily. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device has the clock edge trigger type of Positive Edge. It is included in FF/Latches. Flip flops designed with 8bits are used in this part. The superior flexibility of this circuit is achieved by using 8 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. It operates from 5V power supplies. The supply voltage should be maintained at 5V for high efficiency.
MC74ACT377DWR2G Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies
MC74ACT377DWR2G Applications
There are a lot of ON Semiconductor MC74ACT377DWR2G Flip Flops applications.
- Bounce elimination switch
- Dynamic threshold performance
- Latch-up performance
- Latch
- Buffer registers
- Matched Rise and Fall
- Storage registers
- Modulo – n – counter
- Differential Individual
- Frequency division
