MC74ACT377MEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT377 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 140MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 3 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74ACT377MEL Overview
The package is in the form of 20-SOIC (0.209, 5.30mm Width). D flip flop is included in the Tape & Reel (TR)package. It is configured with Non-Invertedas an output. The trigger configured with it uses Positive Edge. Surface Mountmounts this electrical part. A voltage of 4.5V~5.5Vis used as the supply voltage. In this case, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74ACTseries contain this type of chip. There should be no greater frequency than 140MHzon its output. In total, it contains 1 elements. As a result, it consumes 8μA of quiescent current without being affected by external factors. There are 20 terminations,It is a member of the 74ACT377 family. A voltage of 5V is used to power it. This JK flip flop has a 4.5pFfarad input capacitance. A device of this type belongs to the family of ACT. There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. 8bits are used in its design. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Keeping the supply voltage (Vsup) above 4.5V is necessary for normal operation. Using 8 circuits, it is highly flexible. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The system runs on a power supply of 5V watts.
MC74ACT377MEL Features
Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies
MC74ACT377MEL Applications
There are a lot of ON Semiconductor MC74ACT377MEL Flip Flops applications.
- Computing
- Frequency Dividers
- Convert a momentary switch to a toggle switch
- Bounce elimination switch
- Divide a clock signal by 2 or 4
- CMOS Process
- Single Up Count-Control Line
- ATE
- Matched Rise and Fall
- Data storage
